STUN special instructions:
You'll get the stickers in two strips, laid out exactly as they are above.  Read the general tips and techniques in the yellow button above.  Understand all that?  Coat the white vinyl with packing tape, as suggested.  Flip both sheets against a window so the printed surface shines through and use a stencil to draw circles on the back of all five cobra sigils.  This way, when you cut them out, you have a guide to use, and they will cut out 100% better and be near perfect circles.  For the white vinyl, cut the sigil out using your guide, and cut all the others out exactly along the printed surface.  Line all 10 of the white vinyl edges with a black sharpie, which will make the transition from sticker to vehicle seamless.  Apply your white stickers.

The clear stickers are basically just cut out and apply.  The only thing you will want to do in order to get top appearance quality is to back the "Python" and "stay clear" stickers with white-out or a silver sharpie.  After you've cut them out and peeled them off the backer, just before you apply them to the vehicle, fill the hollow spot of the "stay clear" and the entire back of the "python" printed surface with either of the above suggested techniques.  If you have both, I recommend the silver for the back of the "python" because even if you go outside the print a little, it won't matter, because you are applying it to an area that has some silver, and it will meld seamlessly.   If you do that to those three stickers, you will get the white effect in a clear sticker.  If you don't want to do this to the "stay clear" the yellow of the guns will instead show through, and that's not a big deal either.