My Tiger Paw Reproduction Stickers are printed on a combination of clear and white vinyl and look highly accurate.  They are $1.25. These stickers have been reconstructed in Photoshop and very closely resemble the real stickers.  All stickers are extremely crisp and all letters have sharp corners; all circular shapes are perfect circles.  These are not, nor are they meant to be, EXACT replicas, nor am I sure that is possible in any case.  However, if you have a dirty and dismal vehicle or one with no stickers, these will most certainly do the trick. 

I print on a conventional printer and do not use white ink.  However, in the case of the T. Paw, this is almost entirely irrelevant, as the stickers lend themselves to the white vinyl quite well, as my demo pics prove.  These are sure to make your vehicle like new.  These stickers do not run.  A few people have posted on the YOJOE boards that my stickers do run, and this is false, unless you are taking it on long forays into the bath with you (I guess since you still collect G.I.Joe, you haven't really grown all the way up, but come on....playing with them in the bathtub?)  If you have any question as to the validity of that statement, go back to my main page and watch the video of me running them under the sink while rubbing them.  For display purposes, these will not cause you any problems.  I spray them with a acrylic sealer that, combined with the vinyl's dry-fast topcoat, makes them extremely resistant to water.
 
Because I print these files to order, you can customize them.  Want a TF sigil added to the set?  No problem.  Want the step background to be red?  No problem.  You can change colors, add, delete and slightly modify at will.  All that limits you with these stickers is your imagination.  Just a warning though; these are designed to go where the instructions say to put them.  Start changing things without asking my opinion how it will work, don't complain later.

Tiger Paw "best steps" special instructions:
The eyes and the "UNITED STATES" is all the comes on clear vinyl.  Cut out the "US" and apply.  Cut the eyes out very close to the printed area. They are pretty big and if you don't trim close, they will flap over.  Once you cut the eyes out, before you stick them on, take a silver sharpie and on the backside (the sticky side) just fill in the area that should be white.  Blow dry and apply.  The silver of the sharpie will give you the white effect needed for the eyes. 

I recommend taking some packing tape and covering the white vinyl stickers.  They don't really need to be protected, but it gives them a nice gloss and makes them look better, in my opinion.  The "CAUTION" sticker is meant to have a white border around the black line, so cut appropriately.  Cut out "CAUTION" AND "STEP" square and line edges with yellow sharpie or other permanent marker.  Cut "TF" logos right on blue line and line edge with blue Sharpie.  I surrounded the teeth in green so you know where to cut.  Just cut off all the green and apply.  Tiger Paw should look like new.